The Cisco router must use multifactor authentication for local access to privileged accounts.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-96247	CISC-ND-000510	SV-105385r1_rule		Medium

Description

Multifactor authentication is defined as: using two or more factors to achieve authentication. Factors include: (i) Something a user knows (e.g., password/PIN); (ii) Something a user has (e.g., cryptographic identification device, token); or (iii) Something a user is (e.g., biometric). To assure accountability and prevent unauthenticated access, privileged users must utilize multifactor authentication to prevent potential misuse and compromise of the system. Local access is defined as access to an organizational information system by a user (or process acting on behalf of a user) communicating through a direct connection without the use of a network. Applications integrating with the DoD Active Directory and utilizing the DoD CAC are examples of compliant multifactor authentication solutions. This control does not apply to the account of last resort or root account. DoD prohibits local user accounts on the device, except for an account of last resort and (where applicable) a root account.

STIG	Date
Cisco IOS XE Router NDM Security Technical Implementation Guide	2019-12-20

Details

Check Text ( C-95081r1_chk )

The Cisco router is not compliant with this requirement. However, the risk associated with this requirement can be fully mitigated if the router is configured to utilize an authentication server to authenticate and authorize users for administrative access. Review the router configuration to verify that the device is configured to use an authentication server as primary source for authentication as shown in the following example: aaa new-model ! aaa authentication login LOGIN_AUTHENTICATION group radius local … … … ip http authentication aaa login-authentication LOGIN_AUTHENTICATION ip http secure-server … … … radius-server host x.x.x.x auth-port 1645 acct-port 1646 key xxxxxxx … … … line con 0 exec-timeout 10 0 login authentication LOGIN_AUTHENTICATION line vty 0 4 exec-timeout 10 0 login authentication LOGIN_AUTHENTICATION If the router is not configured to use an authentication server to authenticate and authorize users for administrative access, this is a finding.

Fix Text (F-101923r1_fix)

Step 1: Configure the Cisco router to use an authentication server as shown in the following example: R4(config)#radius host 10.1.48.2 key xxxxxx Step 2: Configure the authentication order to use the authentication server as primary source for authentication as shown in the following example: R4(config)#aaa authentication login LOGIN_AUTHENTICATION group radius local Step 3: Configure all network connections associated with a device management to use an authentication server for the purpose of login authentication. R4(config)#line vty 0 4 R4(config-line)#login authentication LOGIN_AUTHENTICATION R4(config-line)#exit R4(config)#line con 0 R4(config-line)#login authentication LOGIN_AUTHENTICATION R4(config-line)#exit R4(config)#ip http authentication aaa login-authentication LOGIN_AUTHENTICATION