All installation-delivered IDMS DCADMIN-level tasks must be properly secured.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-251589	IDMS-DB-000090	SV-251589r807634_rule		Medium

Description
If DC Administrator-level tasks are not secured, any user logged on to IDMS may use them to access and manipulate various resources within the DBMS. This can be mitigated using the proper entries in the SRTT. Satisfies: SRG-APP-000033-DB-000084, SRG-APP-000211-DB-000122

STIG	Date
CA IDMS Security Technical Implementation Guide	2021-11-10

Details

Check Text ( C-55024r807632_chk )
Examine load module RHDCSRTT by executing CA IDMS utility IDMSSRTD, or by issuing command "DCMT DISPLAY SRTT" while signed onto the CV, and reviewing the output. Note: This requires PTFs SO07995 and SO09476. Validate the following suggested DC-Administrator-level tasks are secured in the SRTT. If they are not secured, this is a finding. (Note that USER, DEVELOPER, DBADMIN, and DCADMIN are suggested categories only). ASF CLOD DCMT OPER PMBILL PMRM SDEL SEND SYSGEN SYSGENT WEBC If "TASK" is not found as the resource type in any of the entries, this is a finding. IF "TASK" is secured internally, this is a finding. If "TASK" is secured externally in the SRTT, review the SRTT entries to ensure that the above tasks are secured, and review the external security manager (ESM) for external class and external name format to make sure the appropriate authorizations have been defined. If they have not, this is a finding.

Check Text ( C-55024r807632_chk )

Examine load module RHDCSRTT by executing CA IDMS utility IDMSSRTD, or by issuing command "DCMT DISPLAY SRTT" while signed onto the CV, and reviewing the output.

Note: This requires PTFs SO07995 and SO09476.

Validate the following suggested DC-Administrator-level tasks are secured in the SRTT. If they are not secured, this is a finding. (Note that USER, DEVELOPER, DBADMIN, and DCADMIN are suggested categories only).
ASF
CLOD
DCMT
OPER
PMBILL
PMRM
SDEL
SEND
SYSGEN
SYSGENT
WEBC

If "TASK" is not found as the resource type in any of the entries, this is a finding.

IF "TASK" is secured internally, this is a finding.

If "TASK" is secured externally in the SRTT, review the SRTT entries to ensure that the above tasks are secured, and review the external security manager (ESM) for external class and external name format to make sure the appropriate authorizations have been defined. If they have not, this is a finding.

Fix Text (F-54978r807633_fix)
The SRTT module must be coded to enable task-level security. When using an ESM, this could be done in the following manner: #SECRTT TYPE=ENTRY, X RESTYPE=TASK, X SECBY=EXTERNAL , X EXTNAME=(RESTYPE,RESNAME), X EXTCLS='CA@IDMS' or to give access specifically to one or more programs (in this case, to ASF): #SECRTT TYPE=ENTRY, RESTYPE=TASK, X SECBY=OFF, X EXTNAME=(RESTYPE,RESNAME),EXTCLS='CA@IDMS' with an OCCUR statement for each task: #SECRTT TYPE=OCCUR,RESTYPE=TASK, X SECBY=EXTERNAL, X RESNAME='ASF' Using the above examples, the ESM must be configured to grant access for resource name "TASK.task-name" to security group (or role) DCADMIN, for security class "CA@IDMS", where "task-name" is one of the DC-Administrator-level programs listed. The appropriate ESM rules must then be given to the appropriate users. For instance, in Top Secret: TSS PER(user_id) CA@IDMS(TASK.ASF) In ACF2: $KEY(SGON.the_extname) TYPE(TASK.ASF) UID(user_id) ALLOW In RACF: RDEFINE CA@IDMS TASK.TASK.ASF UACC(NONE) PERMIT TASK.ASF CLASS(CA@IDMS) ID(user_id) ACCESS(READ) After making the above changes, assemble and link RHDCSRTT to create a new SRTT. To implement the new SRTT, either recycle any CVs that use the SRTT or issue these commands: DCMT VARY NUCLEUS MODULE RHDCSRTT NEW COPY DCMT VARY NUCLEUS RELOAD

Fix Text (F-54978r807633_fix)

The SRTT module must be coded to enable task-level security. When using an ESM, this could be done in the following manner:

#SECRTT TYPE=ENTRY, X
RESTYPE=TASK, X
SECBY=EXTERNAL , X
EXTNAME=(RESTYPE,RESNAME), X
EXTCLS='CA@IDMS'

or to give access specifically to one or more programs (in this case, to ASF):

#SECRTT TYPE=ENTRY, RESTYPE=TASK, X
SECBY=OFF, X
EXTNAME=(RESTYPE,RESNAME),EXTCLS='CA@IDMS'

with an OCCUR statement for each task:

#SECRTT TYPE=OCCUR,RESTYPE=TASK, X
SECBY=EXTERNAL, X
RESNAME='ASF'

Using the above examples, the ESM must be configured to grant access for resource name "TASK.task-name" to security group (or role) DCADMIN, for security class "CA@IDMS", where "task-name" is one of the DC-Administrator-level programs listed. The appropriate ESM rules must then be given to the appropriate users. For instance, in Top Secret:
TSS PER(user_id) CA@IDMS(TASK.ASF)

In ACF2:
$KEY(SGON.the_extname) TYPE(TASK.ASF)
UID(user_id) ALLOW

In RACF:
RDEFINE CA@IDMS TASK.TASK.ASF UACC(NONE)
PERMIT TASK.ASF CLASS(CA@IDMS) ID(user_id) ACCESS(READ)

After making the above changes, assemble and link RHDCSRTT to create a new SRTT. To implement the new SRTT, either recycle any CVs that use the SRTT or issue these commands:
DCMT VARY NUCLEUS MODULE RHDCSRTT NEW COPY
DCMT VARY NUCLEUS RELOAD