OpenShift must display the Standard Mandatory DOD Notice and Consent Banner before granting access to platform components.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-257516	CNTR-OS-000130	SV-257516r921491_rule		Low

Description
OpenShift has countless components where different access levels are needed. To control access, the user must first log into the component and then be presented with a DOD-approved use notification banner before granting access to the component. This guarantees privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

Description

OpenShift has countless components where different access levels are needed. To control access, the user must first log into the component and then be presented with a DOD-approved use notification banner before granting access to the component. This guarantees privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

STIG	Date
Red Hat OpenShift Container Platform 4.12 Security Technical Implementation Guide	2023-08-28

Details

Check Text ( C-61251r921489_chk )
To verify the OpenShift CLI tool is configured to display the DOD Notice and Consent Banner, do either of the following steps: Log in to OpenShift using the oc CLI tool. oc login -u enter password when prompted If the DOD Notice and Consent Banner is not displayed, this is a finding. Or Verify that motd config map exists and contains the DOD Notice and Consent Banner by executing the following: oc describe configmap/motd -n openshift If the configmap does not exist, or it does not contain the DOD Notice and Consent Banner text in the message data attribute, this is a finding.

Check Text ( C-61251r921489_chk )

To verify the OpenShift CLI tool is configured to display the DOD Notice and Consent Banner, do either of the following steps:

Log in to OpenShift using the oc CLI tool.

oc login -u
enter password when prompted

If the DOD Notice and Consent Banner is not displayed, this is a finding.

Or

Verify that motd config map exists and contains the DOD Notice and Consent Banner by executing the following:

oc describe configmap/motd -n openshift

If the configmap does not exist, or it does not contain the DOD Notice and Consent Banner text in the message data attribute, this is a finding.

Fix Text (F-61175r921490_fix)
The following command will create a configmap that displays the DOD Notice and Consent Banner when logging in using the OpenShift CLI tool by executing the following: echo 'apiVersion: v1 kind: ConfigMap metadata: name: motd namespace: openshift data: message: "You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions:\n\n-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.\n\n-At any time, the USG may inspect and seize data stored on this IS.\n\n-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.\n\n-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.\n\n-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details."' \| oc apply -f -

Fix Text (F-61175r921490_fix)

The following command will create a configmap that displays the DOD Notice and Consent Banner when logging in using the OpenShift CLI tool by executing the following:

echo 'apiVersion: v1
kind: ConfigMap
metadata:
name: motd
namespace: openshift
data:
message: "You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions:\n\n-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.\n\n-At any time, the USG may inspect and seize data stored on this IS.\n\n-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.\n\n-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.\n\n-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details."' | oc apply -f -