UCF STIG Viewer Logo

RHEL 9 must not forward IPv4 source-routed packets by default.


Overview

Finding ID Version Rule ID IA Controls Severity
V-257964 RHEL-09-253045 SV-257964r942993_rule Medium
Description
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It must be disabled unless it is absolutely required, such as when IPv4 forwarding is enabled and the system is legitimately functioning as a router.
STIG Date
Red Hat Enterprise Linux 9 Security Technical Implementation Guide 2023-12-01

Details

Check Text ( C-61705r942992_chk )
Verify RHEL 9 does not accept IPv4 source-routed packets by default.

Check the value of the accept source route variable with the following command:

$ sudo sysctl net.ipv4.conf.default.accept_source_route

net.ipv4.conf.default.accept_source_route = 0

If the returned line does not have a value of "0", a line is not returned, or the line is commented out, this is a finding.

Check that the configuration files are present to enable this network parameter.

$ sudo /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F net.ipv4.conf.default.accept_source_route | tail -1

net.ipv4.conf.default.accept_source_route = 0

If "net.ipv4.conf.default.accept_source_route" is not set to "0" or is missing, this is a finding.
Fix Text (F-61629r925878_fix)
Configure RHEL 9 to not forward IPv4 source-routed packets by default.

Add or edit the following line in a single system configuration file, in the "/etc/sysctl.d/" directory:

net.ipv4.conf.default.accept_source_route = 0

Load settings from all system configuration files with the following command:

$ sudo sysctl --system