UCF STIG Viewer Logo

RHEL 9 must ignore Internet Protocol version 4 (IPv4) Internet Control Message Protocol (ICMP) redirect messages.


Overview

Finding ID Version Rule ID IA Controls Severity
V-257958 RHEL-09-253015 SV-257958r942985_rule Medium
Description
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack. This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required.
STIG Date
Red Hat Enterprise Linux 9 Security Technical Implementation Guide 2023-12-01

Details

Check Text ( C-61699r942984_chk )
Verify RHEL 9 will not accept IPv4 ICMP redirect messages.

Check the value of the all "accept_redirects" variables with the following command:

$ sudo sysctl net.ipv4.conf.all.accept_redirects

net.ipv4.conf.all.accept_redirects = 0

If the returned line does not have a value of "0", a line is not returned, or the line is commented out, this is a finding.

Check that the configuration files are present to enable this network parameter.

$ sudo /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F net.ipv4.conf.all.accept_redirects | tail -1

net.ipv4.conf.all.accept_redirects = 0

If "net.ipv4.conf.all.accept_redirects" is not set to "0" or is missing, this is a finding.
Fix Text (F-61623r925860_fix)
Configure RHEL 9 to ignore IPv4 ICMP redirect messages.

Add or edit the following line in a single system configuration file, in the "/etc/sysctl.d/" directory:

net.ipv4.conf.all.accept_redirects = 0

Load settings from all system configuration files with the following command:

$ sudo sysctl --system