RHEL 9 must disable the Transparent Inter Process Communication (TIPC) kernel module.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-257808	RHEL-09-213065	SV-257808r925411_rule		Medium

Description

It is detrimental for operating systems to provide, or install by default, functionality exceeding requirements or mission objectives. These unnecessary capabilities or services are often overlooked and therefore may remain unsecured. They increase the risk to the platform by providing additional attack vectors. Failing to disconnect unused protocols can result in a system compromise. The Transparent Inter Process Communication (TIPC) is a protocol that is specially designed for intra-cluster communication. It can be configured to transmit messages either on UDP or directly across Ethernet. Message delivery is sequence guaranteed, loss free and flow controlled. Disabling TIPC protects the system against exploitation of any flaws in its implementation.

STIG	Date
Red Hat Enterprise Linux 9 Security Technical Implementation Guide	2023-12-01

Details

Check Text ( C-61549r925409_chk )
Verify that RHEL 9 disables the ability to load the tipc kernel module with the following command: $ sudo grep -r tipc /etc/modprobe.conf /etc/modprobe.d/* blacklist tipc If the command does not return any output, or the line is commented out, and use of tipc is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.

Fix Text (F-61473r925410_fix)
To configure the system to prevent the tipc kernel module from being loaded, add the following line to the file /etc/modprobe.d/tipc.conf (or create tipc.conf if it does not exist): install tipc /bin/false blacklist tipc