UCF STIG Viewer Logo

The Juniper perimeter router must be configured to drop IPv6 packets containing an extension header with the Endpoint Identification option.


Overview

Finding ID Version Rule ID IA Controls Severity
V-254057 JUEX-RT-000850 SV-254057r844204_rule Medium
Description
The optional and extensible natures of the IPv6 extension headers require higher scrutiny since many implementations do not always drop packets with headers that it cannot recognize, and hence could cause a denial-of-service on the target device. In addition, the type, length, value (TLV) formatting provides the ability for headers to be very large. This option type is associated with the Nimrod Routing system and has no defining RFC document.
STIG Date
Juniper EX Series Switches Router Security Technical Implementation Guide 2023-03-23

Details

Check Text ( C-57509r844202_chk )
This requirement is not applicable for the DODIN Backbone.

Review the router switch configuration and determine if filters are bound to the applicable interfaces to drop IPv6 packets containing an option type values of 0x8A (Endpoint Identification) regardless of whether it appears in a Hop-by-Hop or Destination Option header.

[edit firewall family inet6]
filter {
term 1 {
from {
next-header [ hop-by-hop dstopts ];
}
then {
log;
syslog;
discard;
}
}

term default {
then {
log;
syslog;
discard;
}
}
}

Note: Juniper routers do not support configuring option types for Hop-by-Hop or Destination Options extension headers. Therefore, all packets with the Hop-by-Hop or Destination Options extension header are dropped.

Verify the filter is applied to applicable interfaces.
[edit interfaces]
{
unit {
family inet6 {
filter {
input ;
}
address .;
}
}
}
Note: Some Juniper devices support both monolithic filters and filter lists. Filter lists separate each term, or set of terms, into a separate filter that is applied sequentially to an interface. If using filter lists, the keywords "input" or "output" change to "input-list" or "output-list". Verify the final list item is a deny-all filter. The deny-all filter is created once per family and can be reused across multiple lists. For example:

input-list [ permit_mgt permit_routing_protocols default-deny ];

If the router is not configured to drop IPv6 packets containing an extension header with the Endpoint Identification option, this is a finding.
Fix Text (F-57460r844203_fix)
Configure the router to drop IPv6 packets containing an option type values of 0x8A (Endpoint Identification) regardless of whether it appears in a Hop-by-Hop or Destination Option header.

set firewall family inet6 filter term 1 from next-header hop-by-hop
set firewall family inet6 filter term 1 from next-header dstopts
set firewall family inet6 filter term 1 then log
set firewall family inet6 filter term 1 then syslog
set firewall family inet6 filter term 1 then discard

set firewall family inet6 filter term default then log
set firewall family inet6 filter term default then syslog
set firewall family inet6 filter term default then discard

set interfaces unit family inet6 filter input
set interfaces unit family inet6 address .