The Juniper PE router must be configured to implement Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) snooping for each Virtual Private LAN Services (VPLS) bridge domain.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-254039	JUEX-RT-000670	SV-254039r844150_rule		Low

Description
IGMP snooping provides a way to constrain multicast traffic at layer 2. By monitoring the IGMP membership reports sent by hosts within the bridge domain, the snooping application can set up layer 2 multicast forwarding tables to deliver traffic only to ports with at least one interested member within the VPLS bridge, thereby significantly reducing the volume of multicast traffic that would otherwise flood an entire VPLS bridge domain. The IGMP snooping operation applies to both access circuits and pseudowires within a VPLS bridge domain.

Description

IGMP snooping provides a way to constrain multicast traffic at layer 2. By monitoring the IGMP membership reports sent by hosts within the bridge domain, the snooping application can set up layer 2 multicast forwarding tables to deliver traffic only to ports with at least one interested member within the VPLS bridge, thereby significantly reducing the volume of multicast traffic that would otherwise flood an entire VPLS bridge domain. The IGMP snooping operation applies to both access circuits and pseudowires within a VPLS bridge domain.

STIG	Date
Juniper EX Series Switches Router Security Technical Implementation Guide	2023-03-23

Details

Check Text ( C-57491r844148_chk )
Review the router configuration to verify that IGMP or MLD snooping has been configured for IPv4 and IPv6 multicast traffic respectively for each VPLS bridge domain (VFI instance). [edit routing-instances ] protocols { igmp-snooping { vlan ; } mld-snooping { vlan ; } } Note: Only EX9200-series devices currently support VPLS. If the router is not configured to implement IGMP or MLD snooping for each VPLS bridge domain, this is a finding.

Check Text ( C-57491r844148_chk )

Review the router configuration to verify that IGMP or MLD snooping has been configured for IPv4 and IPv6 multicast traffic respectively for each VPLS bridge domain (VFI instance).

[edit routing-instances ]
protocols {
igmp-snooping {
vlan ;
}
mld-snooping {
vlan ;
}
}

Note: Only EX9200-series devices currently support VPLS.

If the router is not configured to implement IGMP or MLD snooping for each VPLS bridge domain, this is a finding.

Fix Text (F-57442r844149_fix)
Configure IGMP or MLD snooping for IPv4 and IPv6 multicast traffic respectively for each VPLS bridge domain. set routing-instances protocols igmp-snooping vlan set routing-instances protocols mld-snooping vlan