The Juniper router must be configured to have Internet Control Message Protocol (ICMP) redirects disabled on all external interfaces.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-254036 | JUEX-RT-000640 | SV-254036r844141_rule | Medium |
| Description |
|---|
| The ICMP supports IP traffic by relaying information about paths, routes, and network conditions. Routers automatically send ICMP messages under a wide variety of conditions. Redirect ICMP messages are commonly used by attackers for network mapping and diagnosis. |
| STIG | Date |
|---|---|
| Juniper EX Series Switches Router Security Technical Implementation Guide | 2023-03-23 |
Details
| Check Text ( C-57488r844139_chk ) |
|---|
| Review the device configuration to determine if controls have been defined to ensure the router does not send ICMP Redirect messages out to any external interfaces. Verify the global "no-redirects" statement is enabled under [edit system] or that individual interface "no-redirects" statements are configured on external interfaces. [edit system] no-redirects; [edit interfaces] unit family inet { no-redirects; address } family inet6 { no-redirects; address } } } If ICMP Redirect messages are enabled on any external interfaces, this is a finding. |
| Fix Text (F-57439r844140_fix) |
|---|
| Disable ICMP redirects on all external interfaces. set system no-redirects set interfaces set interfaces |