UCF STIG Viewer Logo

Google Android 13 must be configured to not allow more than 10 consecutive failed authentication attempts.


Overview

Finding ID Version Rule ID IA Controls Severity
V-258479 GOOG-13-706400 SV-258479r929253_rule Medium
Description
The more attempts an adversary makes to guess a password, the more likely the adversary will enter the correct password and gain access to resources on the device. Setting a limit on the number of attempts mitigates this risk. Setting the limit at 10 or less gives authorized users the ability to make a few mistakes when entering the password but still provides adequate protection against dictionary or brute force attacks on the password. SFR ID: FMT_SMF_EXT.1.1 #2c, FIA_AFL_EXT.1.5
STIG Date
Google Android 13 BYOAD Security Technical Implementation Guide 2023-09-19

Details

Check Text ( C-62219r929251_chk )
Review managed Google Android 13 device configuration settings to determine if the work profile has the maximum number of consecutive failed authentication attempts set at 10 or fewer.

This validation procedure is performed on both the EMM Administration Console and the managed Google Android 13 device.

On the EMM console:

1. Open "Lock screen" settings.
2. Open "Lock screen restrictions".
3. Verify that "Max password failures for local wipe" is set to a number between 1 and 10.

On the managed Google Android 13 device:

1. Lock the device screen.
2. Attempt to unlock the device and validate that the device autowipes the Work Profile after specified number of invalid entries. Note: Perform this verification only with a test phone set up with a production profile.
3. Attempt to unlock the Work Profile and validate that the device autowipes the Work Profile after specified number of invalid entries. Note: Perform this verification only with a test phone set up with a production profile.

If the EMM console device policy is not set to the maximum number of consecutive failed authentication attempts at 10 or fewer, or if on the managed Google Android 13 device the device policy is not set to the maximum number of consecutive failed authentication attempts at 10 or fewer, this is a finding.
Fix Text (F-62128r929252_fix)
Configure the Google Android 13 device to allow only 10 or fewer consecutive failed authentication attempts.

Note: Work Profile will be wiped.

On the EMM console:

1. Open "Lock screen" settings.
2. Open "Lock screen restrictions".
3. Set "Max password failures for local wipe" to a number between 1 and 10.